Brass Neutral Links
Brass Earthing
Components
Brass Terminal Blocks
Brass Electrical Fittings
Brass Lamp Parts
Brass Panel Boards
Brass Electrical
Accessories
Copper Bronze Bolted
Lugs
Copper Bonded Earthing
Rods
Brass Inline Connector
Splices
Pre-Insulated Copper
Terminals
Brass Battery Terminals
Copper Battery
Terminals
Brass Battery
Connectors
Copper Battery
Connectors
Brass Electronic
Connectors
Brass Pin Electrical
Plugs
Brass Conduit Fittings
Brass Grounding Clamps
Brass Grounding
Connectors
Brass Fasteners
Brass Cable Glands
Brass Door Fittings
Brass Garden Hose
Fittings
Brass Metal Casting
Brass Pipe Fittings
Brass Hinges
Brass Turned & Pressed
Parts
Brass Washer
Stainless Steel Pipe
Fittings |

|
Brass
Cable Glands & Accessories
|
|
Our brass parts range in cable glands include PG cable gland,
BW 2 part cable gland, BW 3 part cable gland, CW
cable gland,
E1W cable gland, A2 type cable gland, TRS type cable gland and
alco type cable gland.
Currently available cable glands accessories :
Lock Nuts
Earthing Tags
Cable Gland Kit Packaging
PVC Shrouds
A2 Type Cable Gland
To BS 6121 pt. 1 suitable for unarmoured or rubber sheathed
cables
Used for indoor as well as outdoor applications
Gland size: From 16 mm to 75 mm.
PG Cable Gland
To DIN - 46320/46255 .
Available with strain relief facility with round or hex
intermediate sockets.
Available in long and short antithreads.
Gland size: PG 9 to PG 56
BW 2 Part Cable Gland
To BS 6121 pt.
Most suitable for SWA, plastic of rubber (Elastomer) sheathed
cables.
Used in dry indoor conditions.
No loose parts and easy to install.
Save times & money.
Can be supplied with integral earth facility.
Gland size: 20 mm to 75 mm (S & L)
E1W Cable Gland
To BS 6121 pt. 1 suitable for SWA or rubber sheathed cables.
Outer seal grips bedding layer of cable for use in most
climatic conditions.
Weather proof and water proof.
Design has seperate armour lock rings.
Can be supplied with integral earth facility.
Gland size: 20 mm to 75 mm (S & L)
BW 3 Part Cable Gland
To BS 6212 pt. 1 most suitable for SWA plastic or rubber
sheathed cables.
Used indoor conditions.
Seperate locking ring helps to clamp the armour properly.
Can be supplied with integral earth facility.
Gland size: 20 mm to 75 mm (S & L)
TRS Type Cable Gland
While not manufactured to a specific standard, are accepted by
many contractors and users as satisfactory method of securing
flexible cables.
Gland size: 16 mm to 32 mm
CW Cable Gland
To BS 6212 pt. 1 most suitable for SWA plastic or rubber
sheathed cables.
Outer seal grips sheath of cable for use in most climatic
conditions.
Weather proof and water proof design.
Has seperate armour lock rings, can be supplied with integral
earth facility.
Gland size: 20 mm to 75 mm (S & L)
Alco Type Cable Gland
Used with SWA, plastic and rubber sheathed cables.
Used in indoor conditions.
Inner ring ensures positive armour clamp and earth continuity.
Gland size: G 204, G206, G254, G256,G 324,G 326, G 405, G 503,
G 505,G 636,G 753,G 755
Gland size: 20 mm to 75 mm (S & L)
Cable Gland Kit Packing
Gland Kit is a ready to use pack
It contains Glands, Lock Nuts, Earth Tags and PVC Shrouds.
Contains two sets upto 32 mm and one set for bigger size
It is a convenient way for the user to purchase complete cable
termination as he is assured of all the required parts.
Free header card with customer home and logo can be provided.
PVC Shrouds
Made from high grade PVC ensure higher IP rating.
Are denoted by gland reference number
They are compatible with each gland size.
Earthing Tags
Are available from 16 mm to 75 mm in Brass.
It ensure earth continuity between the electrical equipment
and the gland.
Lock Nuts
Are available in size from 16 mm to 75 mm in Brass and
Galvanized Steel.
It ensure earth continuity between the electrical equipment
and the gland.
|
|
Details
|
Special Features :
Available as per specifications
Material:
Free Cutting Brass IS 319 Type (I) or
Free Cutting Brass As Per BS 249 Type (I) or
High Grade Free Cutting Brass
Any Special Brass Material Composition As Per Customers
Requirement.
Finish And Coating :
Natural, Nickle Plated, Tin Plated or any coating as per
customer specification
PG Threaded Brass Cable Glands
Features To DIN - 46320 / 46255 available with strain relief
facility. With round or hex intermediate sockets and long and
short antithreads.Takes all sorts of electrical cables .
Gland Size PG 9 to PG 56
BW 2 Part Brass SWA Cable Gland
Features To BS 6121 pt. 1 most suitable for single wire
armoured, plastic of rubber (Elastomer) sheathed electrical
cables. Used in dry indoor conditions. No loose parts and easy
to install. Save times & money. Can be supplied with integral
earth facility.
Gland size 20mm to 75mm (S & L)
IP rating IP 54
BW 3 Part Brass Cable Glands
Features TO BS 6212 pt. 1 most suitable for SWA plastic or
rubber sheathed cables. Used indoor conditions. Seperate
locking ring helps to clamp the armour properly Can be
supplied with integral earth facility.
Gland Sizes 20mm to 75mm (S & L)
IP rating IP 54
CW BRASS CABLE GLAND
Features To BS 6121 pt. most suitable for SWA armoured plastic
or rubber sheathed electric cables Outer seal grips sheath of
cable. for use in most climatic conditions Weather proof and
water proof design. Has seperate armour lock rings. can be
supplied with integral earth facility.
Gland Size 20 mm to 75 mm (S & L)
IP rating IP 66
E1W Brass Cable glands
Features To BS 6121 pt. 1 suitable for SWA or rubber sheathed
cables. Outer seal grips bedding layer of cable. for use in
most climatic conditions Weather proof and water proof. Design
has seperate armour lock rings. can be supplied with integral
earth facility.
Gland sizes 20 mm to 75 mm (S & L)
IP rating IP 66
T.R.S. Brass Cable Glands
Features While not manufactured to a specific standard, are
accepted by many contractors and users as satisfactory method
of securing flexible cables.
Gland Size 16m to 32mm
Alco Brass Cable Glands
Features Used with SWA, plastic and rubber sheathed electrical
cables. Used indoor conditions.inner ring ensures positive
armor clamp and earth continuity.
Gland Size G 204,G 206,G 254, G 256,
G 324,G 326, G 405, G 503,
G 505,G 636,G 753,G 755
A2 Type Brass Cable Gland
Features To BS 6121 pt. 1 suitable for unarmoured plastic or
rubber sheathed cables for indoor as well as outdoor
applications.
Gland Size from 16 mm to 75 mm
Cable Gland Kit
Gland Kit is a ready to use pack containing glands,
Lock Nuts, Earth Tags and PVC Shrouds. Contains
two sets upto 32mm and one set for bigger size. It is
a convenient way for the user to purchase complete
cable termination as he is assured of all the required
parts.
Free header cards with customer name and logo can
be provided. All BW CW E1W A2 CX CXT glands , kits
and gland packs confirm to BS 6121 ensuring smooth
termination of electrical cables .
Aluminium and S.S. ( stainless Steel ) cable glands
Also available.
|
|
Brass Cable Glands & Cable Gland
Accessories
|
Brass Cable Glands
|
Brass Cable Gland Accessories
|
|
| |
Pages
|
Brass Neutral Links
|
Brass Neutral Link
Bars |
Brass Earthing
Components
|
Brass Terminal Blocks |
Brass Electrical Fittings |
Brass Lamp
Parts |
Brass Panel Boards |
Brass Electrical Accessories |
Copper
Bronze Bolted Lugs |
Copper Bonded Earthing Rods |
Brass Inline
Connector Splices |
Pre-Insulated Copper Terminals |
Brass Battery
Terminals |
Copper Battery Terminals |
Brass Battery Connectors |
Copper Battery Connectors |
Brass Electrical Connectors |
Brass Pins
& Electrical Plugs |
Brass Conduit Fittings |
Brass Grounding Clamps
|
Brass Grounding Components |
Brass Fasteners
|
Brass Anchors
|
Brass Bolts
|
Brass Nuts
|
Brass Screws
|
Brass Cable Glands &
Cable Gland Accessories |
Brass Cable Glands
|
Brass Cable Gland
Accessories |
Brass
Door Fittings |
Brass Handles |
Brass Door Knobs |
Brass Door
Knockers |
Brass Bathroom Door Fittings |
Brass Garden Hose Fittings
|
Brass Hose Fittings |
Brass Garden Hose Barbs |
Brass Garden Hose
Nipples |
Brass Garden Hose Nipples |
Brass Garden Hose Accessories
|
Brass Metal Casting |
Brass Pipe Fittings
|
Brass Plumbing
Fittings |
Brass Sanitary
Fittings |
Brass Hinges |
Brass Bearing Hinges |
Brass Turned &
Pressed Parts |
Brass Turned Parts
|
Brass Pressed Parts
|
Brass Washer
|
Copper Washer
|
Stainless Steel
Vulcanized Washer |
Brass Pressed
Components |
Stainless Steel Pipe
Fittings |
Stainless Steel
Fittings |
|
| |
|
|
| |
|